Install Rear Saddle Pole
(c)
without Extension Poles
(c1)
IMPORTANT: The Extension Poles should be installed later for raising the structure,
thereby alleviating the need for a stepping stool for assembly. To insert Rear & Front Saddle
poles, stand on webbing strap, point U-Tube upward and insert.
Install the Front Saddle Pole
(a)
Install the Upper Sides
(e)
and Upper Center
(f)
Saddle Poles
Assemble Center Saddle Pole
(b)
leaving the bottom sections unconnected (they are shock-corded).
Cord-lock the top of the Center Saddle Pole to the three Spanner Poles
(e & f)
.
Pull Tent Cover over partially assembled frame (see Step 4 Cover Install section for details).
Install Rear Saddle Pole Extensions
(c1)
, thereby lifting the Arc structure to full height.
Install Center Saddle Pole
(b1)
extensions (with clips) to U-Tubes
(g)
.
Install the two Lower Spanner Poles
(d)
on sides and cord-lock them to Center Saddle Poles.
Saddle Pole Extensions (c1)
Rear Saddle Pole Extension
Cord-lock Shown Below
c1
Saddle Pole Extensions with C-Clips (b1)
