background image

USAGE GUIDELINES

The Rack-IT bicycle carrier’s maximum load weight is 80lbs. Do not exceed this carrying capacity. Do not exceed the 

receiver hitch manufacturer’s tongue weight rating.
Do not use this rack and accessories for purposes other than those for which they were designed. Failure to follow the 

guidelines of the product’s instructions will void the warranty.
To learn more about our line of bicycle carriers for vehicle, home storage, and accessory options for carrying fat bikes, 

snowboards/skis, and more, be sure to visit our website: www.LetsGoAero.com

To register your product, visit the Let’s Go Aero website at www.LetsGoAero.com

ONE YEAR LIMITED WARRANTY

Let’s Go Aero warrants this product to be free from defect in material and workmanship for one year (retain your sales re-

ceipt for your records). Any product or part thereof found to be defective within that period will be replaced without charge 

provided that: (1) the product was not misused; (2) no alterations or modifications were made; (3) its failure was not a 

result of normal wear expected in the use of the product; (4) the product or part is delivered, freight prepaid, to Let’s Go 

Aero.  Manufacturers only obligation shall be to replace such products or parts proved to be defective. A Return Merchan-

dise Authorization is required prior to return. Please contact Let’s Go Aero toll-free, at 877-464-2376 or 719-630-3800, or 

via email to [email protected] to get an RMA number.This warranty terminates if a purchaser transfers the product 

to any other person. No warranty is given for LGA products purchased outside of the United States and Canada.

For More Information & Accessories

Visit our Website - www.LetsGoAero.com

Contact Us at 877-474-2376 or 719-630-3800 | Email [email protected]

U.S. Patent No: D717716; D7177177; D684917; 8,899.456; D722289; Patents Pending 

Copyright © 2017 Lets Go Aero Inc.

Содержание Rack-IT H01199






Отзывы: