Let's Go Aero LittleGiant Скачать руководство пользователя страница 1

Страница: 1 / 15

Page 1 of 15

ASSEMBLY & OPERATING INSTRUCTIONS

LittleGiant & SpecOPS Trailers

IMPORTANT NOTICE ABOUT LICENSING YOUR KIT TRAILER

BE SURE TO READ THIS NOTICE!

YOUR MANUFACTURER CERTIFICATE OF ORIGIN (MSO) IS REQUIRED TO LICENSE THIS

TRAILER.

YOUR MSO WITH VIN TAG IS PROVIDED TO YOU BY YOUR DEALER (THE RESELLER

FROM WHOM YOU BOUGHT THIS TRAILER).

CONTACT YOUR DEALER FOR THE STATUS OF RECEIVING YOUR MSO WITH VIN TAG

STATE LAWS ALLOW YOU 30 DAYS TO REGISTER YOUR TRAILER WITH THE DMV.

SIMPLY SAVE YOUR SALES INVOICE IN YOUR GLOVE BOX WHEN OPERATING WITHIN

YOUR GRACE PERIOD.

To license this trailer at the DMV or transfer ownership of your trailer before licensing it,

you MUST have your Manufacturer Certificate of Origin (MSO).

This statement is the trailer’s

“birth certificate”. Motor vehicle law in most states require trailer registration; the DMV gives you

a license plate upon registration.

Contact your local DMV for any additional requirements in your jurisdiction.

Your trailer VIN tag is also included with your MSO, and must be affixed to the driver

side of your trailer’s drawbar as part of your assembly procedures and in event of DMV

inspection.

If you do not register your trailer, SAVE YOUR MSO for the future need, and apply

your VIN tag as instructed

Trailer Licensing Notice

Assembly

Safe Use & Operation

Safety Checklist

Inspection, Maintenance

and Cleaning

Warranty / Repair

Procedures

Pg. 1

Pg. 2

Pg. 11

Pg. 12

Pg. 15

Table of Contents:

Revision Date: 010122

Trailer Manual-010122Rev

Содержание LittleGiant
















Результаты поиска

Содержание LittleGiant

Отзывы:

Бренды по названию

Популярные бренды

Let's Go Aero LittleGiant, Инструкции по сборке и эксплуатации

Результаты поиска

Содержание LittleGiant

Отзывы:

Бренды по названию

Популярные бренды