CARRIER INSTALLATION [CARGO RACK NOT INCLUDED]
DETAIL 9
DETAIL 11
DETAIL 10
DETAIL 12
STEP 1:
Install Foam
Cushions [
L
] on ends of
Horizontal Legs [
B
] as
shown. [DETAIL 9 & 10]
STEP 2:
Center and
place the BikeTree inside
the Carrier with the
Horizontal Legs [
B
] running
perpendicular to the length
of the carrier. [DETAIL 11 &
12]
STEP 3:
Remove the End Cap and the highest
Wheel Cradle located at the top of each Wing. On
the inside of the Wing, slip the looped end of the
Ratchet Strap [
M
] around the Wheel Cradle and
reconnect the Cradle with Cotter Pin. Reinstall
End Cap over Ratchet Strap. Complete for both
Wings. [DETAIL 13 & 14]
STEP 4:
Connect the
Quick Link End of the
Ratchet Strap to the
Carrier’s provided tie down
position. Fully tighten
Ratchet Straps [
M
] evenly
on both sides to remove
shifting. [DETAIL 15 & 16]
DETAIL 13
DETAIL 15
DETAIL 16
DETAIL 14
B
M
M
H
L
