STEP 2
STEP 1
Attach Adjustable Rubber Straps [
N
]
to the Wheel Cradles [
L
] and Wheel
Stops [
M
] With the hammerhead
end facing away Peg. [DETAIL 5]
To attach Cradle Assembly [
L
] to
wing [
K
], remove small cotter pin
[
J
], insert through hole, and reattach
small cotter pin [
J
] as shown in
[DETAIL 6].
NOTE: Pad position is not fixed.
You can slide pads on wing [
K
] to
expose additional holes. Where
you choose to attach each cradle
assembly will depend on the size
and shape of the bicycle(s) to be
transported. Attach one cradle assembly to each side of each wing [
K
], two
cradle assemblies per wing.
Loosen and slip Wheel Stops [
M
] onto the Wing from below the Rubber
Bummers with each Peg matching the direction of the Cradles Assembly as
Shown [DETAIL 7].
J
DETAIL 7
WARNING:
ALWAYS MAKE SURE EACH
CRADLE ASSEMBLY IS HELD IN
PLACE WITH A SMALL COTTER PIN
[
J
] AS SHOWN IN DETAIL 6.
K
H
DETAIL 5
K
H
G
PADS
J
F
K
F
H
DETAIL 6
K
Connect the U-Tube [
A
] to the
Horizontal Legs using 13 mm Hex
Bolts [D] and 13 mm Lock Nuts [C]
as shown [Detail 1].
