PAGE 1 OF 5
GearSpace
®
Bike Mounts
Bike Mount System For GearSpace Cargo Carrier Use
GS Bike Mounts Manual-070218
ASSEMBLY AND OPERATION
NOTE:
The GearSpace Bike Mount is a Universal Bicycle
Mounting System created to accommodate and transport bikes
inside the GearSpace Cargo Carrier. In order to achieve a custom
fit for your bicycle, this Bike Mount can be assembled in many
different configurations.
The steps below outline some common
arrangements.
The GearSpace Bike Mount attaches to the carrier using two (2)
existing Hex Bolts located on the GearSpace floor attaching the carrier to the wings of the platform [see your
GearSpace Manual if you need clarification on these locations]. Prepare your GearSpace by choosing your
preferred installation position using two bolts on either located on either the drivers or passenger side of the
carrier. Using a 10mm Socket and Wrench, remove the chosen two (2) existing Hex Bolts from the carrier floor
as set the bolts and hardware aside. Wipe down the area with a damp cloth. [Figure 1]
NOTE:
For installation of two (2) GearSpace Bike Mounts, one position will be one the drivers side and one on
the passenger side on the opposite end of the carrier.
PARTS LIST - PER BIKE
Qty Description
C-CHANNEL
U-BRACKET
FORK MOUNT
LARGE HEX BOLT
SMALL HEX BOLT
SPRING NUT
LARGE FLAT WASHER
SMALL FLAT WASHER
HEX NUT
SPLIT RING WASHER
D-RING
BUNGEE
A
B
C
D
E
F
G
H
J
K
L
M
1
2
1
2
2
2
6
3
2
2
1
1
[Figure 1]
*GEARSPACE
DRAWN
SHORT FOR
CLARITY
Install the C-Channel [
A
] in the prepared location on the GearSpace
Floor using the removed Hex Bolts and hardware from the above step,
also including a Large Washer between the exisitng Hex Bolt and
C-Channel.
[Figure 2]
[Figure 2]
Step 1:
Step 2:
TOOL: 10MM SOCKET WRENCH OR WRENCH X2
TOOL: 10MM SOCKET WRENCH OR WRNECH X2
P/N HGK963 P/N HGK970
A
GEARSP
ACE
B
G
L
M
D
H
K
C
J
F
E
EXISITING
HEXBOLTS
EXISTING HEX BOLTS
EXISTING WASHERS
EXISTING WASHERS
EXISTING NUTS
A
G
