Page 7 of 9
OPERATION: BICYCLE MOUNTING
Hang bicycles by the tires on the Upper Wheel Cradles
[W]
with the chain rings to the outside. [Fg. 23 & 24]
Adjust the Foam Bumpers located on the Wings
[Z]
to protect the frame of the bicycle.
IMPORTANT:
For two bicycles, position the bicycles facing in opposite directions (front-to-back/back-to-front)
with the
chain ring to the outside
.
[Fg. 23]
[Fg. 24]
W
W
Secure Rubber Straps
[Y]
on to Upper Wheel Cradles
[W]
using the tightest
hole available. [Fg. 25]
Slide the Lower Wheel Cradle
[X]
to meet the bottom/side of the bicycle tire.
Secure the Lower Wheel Cradle
[X]
using the same technique as the Upper
Wheel Cradles. [Fg. 26 & 27]
TIP:
Pull the Rubber Straps
[Y]
to the outside edge of the Lower Cradle
[X]
to position bicycles wheels so the frame of the bicycle is pulled away from
the Wings
[Z]
for wheel touch only performance. [Fg. 27]
[Fg. 25]
W
Y
[Fg. 26
X
Y
[Fg. 27]
X
Y
