background image

10

USER MANUAL

MAiN PAgE

the top of the main page consists of two parts, which are both 
updated every 60 seconds. the one on the left is showing numerical 
informations about the quantity of the energy produced by the 
power station since its installation, about the quantity of the energy 
produced by the power station in a current day, about the earnings 
since the power station's installation, and about the quantity of 
reduced co

2

 emissions since the power station's installation. the 

income depends on the price setting that the user can change at the 
Plant settings. the right field contains a chart showing the produced 
power in a current day. clicking on the chart with the left mouse 

4  Main page

Each micro inverter is represented with a circle at the same 
position as it stands in your power station. the numbers show 
the produced energy and current power for each inverter, while 
the number of lines and their colours show the ratio of micro 
inverter output power and its status. the higher that the 
number of lines is, the higher the ratio of micro inverter output 
power is. if some alarm appears at the micro inverter the lines 
will be coloured red and an additional box with the explanation 
of the error will appear. if you click on the circle of working micro 
inverter, you will be redirected to the page with panel statistics. 
otherwise, if you click on the circle of the micro inverter with an 
alarm you will be redirected to the Alarm history.

4.1  Physical layout

button, changes the shown data from produced power in a current 
day to the produced energy in a current day. A blue dot is always 
pointing at the current time at the Letrika communication gateway.
Above the field containing a chart there is an 

ON/OFF

 button, 

which can be used when you decide to turn the power station on 
or off. on its right side there is a 

STATUS

 light, which is coloured 

green when the power station is on and coloured grey when power 
station is off or when at least one of the micro inverters is sending 
a warning or an alarm. 
there are 5 different views to chose among at the Main page.

Figure 11: Physical layout

Figure 10: overview of the power station

Содержание COMMUNICATION GATEWAY

















Отзывы: