Letatwin LM390, Руководство пользователя

Страница: 65 / 75

Fel! Använd fliken Start om du vill tillämpa
見出し
1 för texten som ska visas här.
65
Error message Contents Countermeasure
INITIALIZE AFTER
DELETE ALL FILES
Attempted to initialize the setting
without deleting/clearing the data
in a document. Implement the initialization of setting
after deleting/clearing the data in the
document.
NO INPUT FILE
Attempted to print without any text
to be printed. Implement the print after inputting the
texts.
OVER INPUT
CHARACTER SIZE
The input text to be printed is too
big, compared to the size of the
print material. Reduce the number of lines, reduce
the
line space or change the
character size to smaller size.
OVER PRINTING
SIZE
The input text to be printed is too
big, compared to the size of the
print material. Reduce the number of lines, reduce
the
line space or change the
character size to smaller size.
OVER PRINTING
LENGTH The “ PRINTING LENGTH ” is too
long.
Reduce the character space,
character width, margin, number of
characters or change the character
size to smaller size. Or change the
print length to longer length.
OVER PITCH
LENGTH The input text is too long for the
set “
PITCH LENGTH ”.
Change “ PITCH LENGTH ”. Or
reduce the character space,
character width, number of
characters or change the character
size to smaller size.
OVER TOTAL PRINT
LENGTH
The total print length is too long.
Tube: maximum 20m
Tape: maximum 5m
Reduce the “ PRINTING LENGTH ”,
such by dividing the file to two files,
or dividing the print range using the
print range setting.
OVER THE NUMBER
OF COPIES
The total print length is too long,
when printing multiple copies.
Tube: maximum 50m
Tape: maximum 7m
Reduce the number of copies.
NO PRINTED
MATERIAL
The consumable has not been set.
Set the print material.
NO INK RIBBON
Ink ribbon runs out.
Ink ribbon feed is abnormal.
Replace the ink ribbon or
take out the consumables, then set
them again. Then continue printing.
COVER IS OPENED The cover is open while printing.
Printing is not possible when the
cover is open. Close it.
THERMAL HEAD IS
UNUSUAL
Cannot perform printing because
the temperature of the printer
head has increased.
After leaving it for a while, print again.
ERROR IN HALF CUT
OPERATION
Cannot perform printing because
the half cutter unit does not
operate normally.
Feed the printed material or replace
the half cutter unit.
USB MEMORY
UNIDENTIFIABLE
The USB memory has not been
formatted properly.
Try the format again. Only “ FAT16 ” or
“ FAT32 ” format can be used.
The USB memory which has security
feature cannot be used.