Letatwin LM390 страница 3 Скачать руководство пользователя | Manualshive

Страница: 3 / 75

background image

Fel! Använd fliken Start om du vill tillämpa

見出し

1 för texten som ska visas här.

3

WARNING



Never disassemble or remodel the machine –– it can cause a fire, electric shock, or

trouble.



Do not put any foreign substance, such as a finger, a pen, or wire, inside the machine

–– it can damage the machine or cause a fire or electric shock.



Obtain power directly from an electric outlet.

Do not put much load on one electric

outlet –– it can cause a fire.



Never put a heavy substance on a power cord –– the cord can be damaged, leading to

a fire or electric shock.



Do not disconnect/reconnect a power plug with a wet hand –– you could receive an

electric shock.



Take care not to splash water or chemicals over the machine.

If any liquid should

somehow get inside the machine, disconnect the power plug immediately from the
electric outlet, and contact our dealer for repair.

If the machine is used in that state, it

can go out of order or cause a fire or electric shock.



Use only specified AC Adapter appended to the machine.



Do not use a machine that is out of order.

If used in such condition, for example, when

emitting smoke or an abnormal sound or peculiar odor, it can cause a fire or electric
shock.

Disconnect the power plug immediately from the electric outlet, and contact

our dealer.



Never touch the printer head.

When just after printing, it is very hot and it may cause

burn on the hand and/or the fingers.



Never touch the cutter part (the blade of Half-cutter and Full cutter) of the instrument.

Touching the cutter part(the blade) may cause serious injury.

CAUTIONS



Data cannot be stored permanently in the USB memory and the internal memory.

Please note that we are not responsible for damages and lost profits resulting from data
loss attributable to battery consumption, problems, repairs, etc.



Do not share the electric outlet with other equipments (such as air conditioner,

refrigerator, microwave, office automation equipment, electrical power tools, etc.) that
requires a large capacity –– the voltage drops and the machine can malfunction.



Do not spread or put paper or cloth on the machine –– it can cause a fire or trouble.



Never lick the ink ribbon, tubes and tapes.



When the machine will not be used for a long time period, due to consecutive holiday,
etc., disconnect the power plug from the electric outlet, for safety.



When connecting a cord or inserting/removing the USB memory, be sure to turn off the

power beforehand.

If the power is not turned off, an injury or trouble may result.



Clean the power plug periodically.

Otherwise, it becomes dusty over time and can

cause a fire or trouble.



When disconnecting the power plug, do not pull the power cord.

Hold and pull out the

power plug.

Otherwise, the power cord can be broken and can cause a fire or electric

shock.

«
1
2
3
4
5
...
»

Содержание LM390












































































Отзывы:

Нет отзывов

Похожие инструкции для LM390

Бренд: Magicard Страницы: 26

Бренд: QMS Страницы: 194

Бренд: Z Corporation Страницы: 4

870 - SuperScript B/W Laser Printer

Бренд: NEC Страницы: 8

Бренд: OEC Страницы: 28

Бренд: Cab Technology Страницы: 10

Бренд: Oki Страницы: 62

Бренд: TallyGenicom Страницы: 144

Бренд: Avery Dennison Страницы: 13

wematter Atmosphere

Бренд: 3D Systems Страницы: 11

ColorQube 87 Series

Бренд: Xerox Страницы: 32

Бренд: Oki Страницы: 4

Magicard Opera 100

Бренд: Ultra electronics Страницы: 2

Бренд: MIMAKI Страницы: 28

VarioLink 2650cp

Бренд: Oce Страницы: 2

Бренд: Intermec Страницы: 282

Бренд: Ricoh Страницы: 288

Бренд: Xerox Страницы: 240

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды