background image

 

 
E-Series 

5 of 20 

User’s Manual 

14. 

WARNING:  HAZARD OF ELECTRIC SHOCK. 

 

15. 

WARNING:  LEAD-ACID BATTERIES GENERATE EXPLOSIVE GASES.  TO PREVENT ARCING 

OR BURNING NEAR BATTERIES, DO NOT DISCONNECT DC CHARGING CORD FROM BATTERIES 
WHEN THE CHARGER IS OPERATING.  KEEP SPARKS, FLAME, AND SMOKING MATERIALS 
AWAY FROM BATTERIES. 

 

16. 

WARNING:  ALWAYS SHIELD EYES WHEN WORKING NEAR BATTERIES.  DO NOT PUT 

WRENCHES OR OTHER METAL OBJECTS ACROSS BATTERY TERMINAL OR BATTERY TOP.  
ARCING OR EXPLOSION OF THE BATTERY CAN RESULT. 

 

17. 

WARNING:  BATTERIES PRODUCE HYDROGEN GAS, WHICH CAN EXPLODE IF IGNITED.  

NEVER SMOKE, USE AN OPEN FLAME, OR CREATE SPARKS NEAR THE BATTERY.  VENTILATE 
THE AREA WHEN THE BATTERY IS CHARGING IN AN ENCLOSED PLACE. 

 

18. 

WARNING:  LEAD-ACID BATTERIES CONTAIN SULFURIC ACID, WHICH MAY CAUSE BURNS.  

DO NOT GET ACID IN EYES, ON SKIN, OR CLOTHING.  IF CONTACT WITH THE EYES OCCURS, 
FLUSH IMMEDIATELY WITH CLEAN WATER FOR 15 MINUTES AND OBTAIN MEDICAL 
ATTENTION. 

 

19. 

WARNING:  ONLY YOUR DEALER’S QUALIFIED SERVICE TECHNICIANS SHOULD PROGRAM 

OR SERVICE THIS EQUIPMENT. 

 

20. 

CAUTION:  DO NOT OPERATE THE CHARGER IF IT HAS RECEIVED A SHARP BLOW, BEEN 

DROPPED, OR OTHERWISE DAMAGED.  HAVE YOUR DEALER’S QUALIFIED SERVICE 
TECHNICIAN EXAMINE AND REPAIR AS NEEDED. 

 

21. 

WARNING:  DO NOT DISASSEMBLE THE CHARGER.  HAVE THE CHARGER EXAMINED BY 

YOUR DEALER’S QUALIFIED SERVICE TECHNICIAN.  INCORRECT RE-ASSEMBLY OF THE 
CHARGER MAY RESULT IN AN EXPLOSION, ELECTRIC SHOCK, OR FIRE. 

 

22. 

CAUTION:  MAKE SURE THE BATTERY SYSTEM HAS THE PROPERLY RATED VOLTAGE, 

AMP-HOURS, AND TYPE (“WET”, “AGM”, “GEL”, ETC.) FOR THIS CHARGING SYSTEM. 

 

SAVE THESE INSTRUCTIONS 

Содержание E - Series SCR





















Отзывы: