Leonard LMS-188-4P, Руководство по эксплуатации

Страница: 6 / 15

LMS Operating Manual Page 6
LMS Email Notification Feature
The LMS sends email on unit reset, alarm, continued alarm and recovery from alarm.
The unit sends email 5 minutes after email failure and repeats every 10 minutes after that.
Once daily, it sends a report of the last 24 hours that includes temperatures on the hour and alarms to
contact #1.
The email subject line identifies the unit and reports the current temperature. The message reports the
last 10 minutes of data. The unit is identified by the name ID001, where 001 is the unit number
assigned by the user as an LMS parameter. All mail settings are setup using web pages accessed by the
IP assigned to the unit.
LMS EMAIL SETUP PARAMETERS -- IP, Setup Web Page Passcode
Factory
NAME Description Explanation Set
IP1 IP 1 First number of IP (1.2.3.4) 192
IP2 IP 2 Second number of IP 168
IP3 IP 3 Third number of IP 0
IP4 IP 4 Fourth number of IP 141
NetworkCode PassCode 5 digit PassCode for Setup web page access
(-30000 to 30000) -22718
Depending on the Network being utilized, the factory setting on the alarm unit for IP1, IP2
and IP3 may need to be changed to match the corresponding settings of the network. IP4
may also need to be changed if another device is using the default number.
Main page:
Access by entering IP address on your browser’s URL.
Main page displays
the designated email server and the email address
the last 10 minutes of data from the LMS
the contact list of up to 8 email addresses
Main page has links to
edit the contact list
*
send a test email to all contact list addresses
view a log of alarm emails and test emails
clear the email log
*
retry getting date & time from nist server
* requires list name/password
Setup page:
Requires the Master name "setupadmin", and the LMS five digit passcode.
Allows specification of Subnet Mask, Gateway, DNS Server, SMTP Server, SMTP auth user, SMTP
password, List Administrator Name, List Password, Time zone [EST: -5, CST: -6, MST: -7, PST –8],
Daylight Savings start and end, and the time the daily report should be sent [0-23].
Edit contact link:
Requires the List User Name and List Password for access.
Allows specification of up to 8 email contact addresses.