www.LeonAudio.com.au
62.
This sets the baud rate for both the RS232 and RS485 serial
comms ports.
Baud Rate
Set baud Rate to 19,200
Examples
Set baud Rate to 115,200
Manual Reset to 9600 baud.
This is a debugging tool to reset the
PCinterface
to 9600
baud rate for those times when one loses control due to
an incorrect baud rate setting.
The following procedure is not meant to be too simple
because we do not want any unqualified fingers resetting
the baud rate of the
PCinterface
once it has been installed.
Unplug the
PCinterface
from the Cue Light Master.
Press and hold the recessed
Reset to 9600 baud
button.
(A straightened out paper clip works well as a tool)
Plug the
PCinterface
into the Cue Light Master.
The Tx and Rx lamps will both flash slowly for about 4
secs.
Release the Reset button as soon as the Tx and Rx lamps
start to flash fast. They only flash fast for 500mS so the
window of opportunity is small.
If successful, the Rx lamp will burn steady for 2 seconds
and the PCinterface will now be running at 9600 baud.
The new setting is saved when the power is off.
•
•
•
•
•
{ R C B 2
{ R C B 5
PCinterface Configuration
Configuration Commands
Monitoring Reply Mode
Heart Beat Signal
Reply Pacing. Pause
between each 5 byte reply
Terminator chx for replies
Baud Rate
Function
R
H
P
T
B
Summary of
PCinterface Functions
•
Value
0
1
2
3
4
5
2,400
9,600
19,200
38,400
57,600
115,200
Baud Rate
Baud Rate
0
Configuration Header
PCinterface configuration
PCinterface configuration
Baud Rate
Value (0-5)
•
This command configures the
PCinterface
and is remembered
when the power is off.
It does not require the
X
for e
X
ecute as it is not uploaded to the
Master Station.
It will execute as soon as the 5th byte
Value
has been received.
{
B
C
R