Leo Palace 21 Leo Lock, Руководство пользователя

Страница: 10 / 24

P.10 Leo Lock Manual
Changing settings from the Leo Remocon App
3-3 Changing Leo Lock unit settings
Locking
and
Unlocking
T
able
o
f
Contents
About
Leo
Lock
[Configurable functions]
(1) Beep volume
(2) PIN entry protection mode
(3) Fire auto unlock (4) Forcible unlocking attempt alert
(5) Mischief prevention function
You can change Leo Lock unit settings. You can change settings for the following functions:
2. Touch [*] on the ten key
pad to start input mode.
4. When you hear "Touch the
card reader with the
primary key card,” touch
the card reader with the
primary key card.
1. Touch the [Wake-up]
button to activate the unit.
Settings are complete when you hear "Registration is
complete.”
3. Touch [# / Key], enter
"Mode number" and
"Setting value" and then
touch [# / Key].
[Procedure]
[Unit settings]
CARD
1 2 3 4
5 6 7
CARD
8
9 0
＊
#
1 2 3 4
5 6 7
CARD
8
9 0
＊
#
1 2 3 4
5 6 7
CARD
8
9 0
＊
#
1 2 3 4
5 6 7
CARD
8
9 0
＊
#
Initial
Settings
Function name Functions
Mode
number
Setting value
(i) Beep volume
Adjusting the volume of the beep that sounds when the operation is
recognized.
01
Specify a number between 0 (minimum)
and 7 (maximum).
7 is set as the default.
[Example] Setting the beep volume to 4.
(ii) PIN entry
protection mode
This mode allows you to enter any numbers without restriction before
entering the registered PIN at the end.
This function makes it difficult to steal the PIN even if someone else is
looking while you are typing.
02
Enable (ON): 1
Disable (OFF): 0
The function is disabled as the default.
[Example] Enabling the PIN entry protection mode.
(iii) Fire auto unlock
This function sounds the voice message "Fire in the room," activates an
alarm, and automatically unlocks the door in the event of fire.
This allows you to get out quickly when a fire occurs.
(Fire detection = When the temperature of the inside unit becomes 55℃
or higher)
(The voice message and alarm continues 1 minute)
04
Enable (ON): 1
Disable (OFF): 0
The function is disabled as the default.
[Example] Enabling fire auto unlock.
(iv) Anomaly
detection alert
This function sounds the voice message "Anomaly detected" and
activates an alarm for 1 minute when an attempt is made to forcibly
remove or destroy the unit.
This is useful for preventing intruders.
07
Enable (ON): 1
Disable (OFF): 0
The function is disabled as the default.
[Example] Enabling anomaly detection alert.
(v) Mischief
prevention function
This function stops authentication for 2 minutes if the card reader is
touched with an unregistered card for five consecutive times.
This is useful for preventing intruders.
08
Enable (ON): 1
Disable (OFF): 0
The function is disabled as the default.
[Example] Enabling mischief prevention function.
[Wake-up] button
Primary key
[Wake-up] button
Primary key
[Wake-up] button
Primary key
[Wake-up] button
Primary key
[Wake-up] button
Primary key
You can also change Leo Lock unit settings from Leo Remocon App. See 5-2 (5) “Changing Leo Lock unit settings from Leo Remocon App" on p. 17.
Leo Remocon App
F
A
Q