Mechanical installation
Assembly of built−on accessories
23
Lenze ¯ BA 33.0008 ¯ 5.0
5.4
Assembly of built−on accessories
Follow these instructions carefully. Please note that the warranty and product liability
will become void in the event of impermissible alterations or modifications to the
motors.
¯
Mount the transmission elements:
–
Shocks and impacts must be avoided! They could destroy the motor.
–
For mounting always use the centre bore in the motor shaft as specified by DIN
332−DR−M...
–
Tolerances of the shaft ends:
£ Æ
50 mm: ISO k6,
>
Æ
50 mm: ISO m6.
¯
Only use an extractor for the disassembly.
¯
When using belts for torque/power transmission:
–
Tension the belts in a controlled manner.
–
Provide protection against accidental contact! During operation, surface
temperatures of up to 140°C are possible.
