Lenze i950 Series, Руководство пользователя

Страница: 358 / 500

16.3.2 Basic setting and options
16.3.2.1 Station name and IP configuration
The station name and the IP configuration can be assigned via the IO-Controller. These set-
tings enable the IO-Controller to identify the inverter in the network and manage the data
exchange.
The station name and the IP configuration can also be assigned via the »EASY Starter«:
•
The station name of the inverter must be entered with permissible characters according to
the PROFINET specification.
4
0x2381:004
• Display of the currently used station name:
4
0x2382:004
•
The IP configuration comprises the assignments of:
•
IP address 0x2381:001
•
Subnet mask 0x2381:002
•
Gateway address 0x2381:003
• Display of the currently used IP configuration:
4
0x2382:001 ... 0x2382:003
Save the station name and the IP configuration in the inverter with mains failure
protection in order that the inverter can be identified via Ethernet if the IO Con-
troller is switched off. 0x2022:003
See:
4
Saving the parameter settings
^
36
An invalid station name or the assignment of invalid combinations of IP address,
subnet mask and gateway address may prevent a connection to PROFINET.
In case of impermissible settings, the red LED "BUS ERR" is blinking and the
error message "PROFINET: stack initialisation error [0x8192]" is displayed.
4
LED status display
^
363
Parameter
Address Name / setting range / [default setting] Info
0x2381:001 PROFINET settings: IP address
0.0.0.0 ... [0.0.0.0] ... 255.255.255.255 Set IP address
•
A changed value will only be effective after the PROFINET communica-
tion is restarted (
0x2380 = 1).
0x2381:002 PROFINET settings: Subnet
0.0.0.0 ... [0.0.0.0] ... 255.255.255.255 Set subnet mask
•
A changed value will only be effective after the PROFINET communica-
tion is restarted (
0x2380 = 1).
0x2381:003 PROFINET settings: Gateway
0.0.0.0 ... [0.0.0.0] ... 255.255.255.255 Set gateway address
•
A changed value will only be effective after the PROFINET communica-
tion is restarted (
0x2380 = 1).
•
The gateway address is valid if the network address of the IP address
is identical to the gateway address. In this case, no gateway function-
ality is used.
•
DHCP is not supported.
0x2381:004 PROFINET settings: Station name Set station name
•
A changed value will only be effective after the PROFINET communica-
tion is restarted (
0x2380 = 1).
0x2381:005 PROFINET settings: I&M1 System designation Input/output of the I&M1 system designation
•
The default setting is an empty string.
0x2381:006 PROFINET settings: I&M1 Installation site Input/output of the I&M1 location identification code
•
The default setting is an empty string.
0x2381:007 PROFINET settings: I&M2 Installation date Input/output of the I&M2 date of installation
•
The default setting is an empty string.
0x2381:008 PROFINET settings: I&M3 additional information Input/output of the I&M3 additional information
•
The default setting is an empty string.
0x2381:009 PROFINET settings: I&M4 signature code
["000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000
00000000000000000000000"] Input/output of the I&M4 signature
•
The default setting is an empty string.
Configuring the network
PROFINET
Basic setting and options
358