8
Locomotive decoder LE010XF
DIGITAL plus
CV
R
Description
Range
Setting
3
3
Acceleration Momentum:
Determines the rate of change of speed upon
acceleration. A higher value leads to a slower
acceleration.
1-31
1
4
4
Brake Momentum:
Determines the rate of change of speed upon
braking. A higher value leads to longer brake
distance.
1-31
1
5
-
Maximum speed
Determines the maximum speed that the
locomotive will move. This allows you to
operate your locomotives in a prototypical
speed range.
1-10
10
-
5
Contains CV29 (see CV29 below)
0-55
6
-
6
Page Register:
Normally this CV is not modified directly by a
user. For correct operation, this CV should be
set to have a value of 1 after any use.
0-127
1
7
7
Version Number:
This location stores the version number of the
decoder. This location is read only.
-
52
8
8
Manufacturers Identification / Factory
reset
This value is the manufacturer ID of the decoder,
(Lenz =99). Writing a value of 33 using Register
mode resets all CVs to their factory condition
-
99
17
-
Extended Address High Byte
192-
231
0
18
-
Extended Address Low Byte
The two byte address if used is contained in
CV17+18
0-255
0
19
Consist Address
The advanced consist address if used is stored in
CV19
0-255
0
29
Decoder Configuration, Byte 1:
Several decoder properties are set with this byte.
Changes are easiest if done in binary mode, but can
also be done by adding the decimal () for all the
features desired together and writing the total into
CV29. The detailed properties are:
0-55
6
