background image

12

Locomotive decoder LE010XF

DIGITAL plus

North American Warranty

Lenz GmbH does everything it can do to ensure that its products are free from
defects and will operate for the life of your model railroad equipment.  From time
to time even the best engineered products fail either due to a faulty part or from
accidental mistakes in installation.  To protect your investment in Digital Plus
products. Lenz GmbH offers a very aggressive 10 year Limited Warranty.

This warranty is not valid if the user has altered, intentionally misused the Digital
Plus product, or removed the product's protection, for example the heat shrink
from decoders and other devices.  In this case a service charge will be applied
for all repairs or replacements. Should the user desire to alter a Digital Plus
Product, they should contact Lenz GmbH for prior authorization.

Year One:

  A full repair or replacement will be provided to the original purchaser

for any item that that has failed due to manufacturer defects or failures caused by
accidental user installation problems.  Should the item no longer be produced and the
item is not repairable, a similar item will be  substituted at the manufacturers
discretion.  The user must pay for shipping to an authorized Lenz GmbH warranty
center.

Year 2 and 3:

  A full replacement for any item will be provided that has failed due

to manufacturer defects.  If the failure was caused by accidental user installation or
use, a minimal service charge may be imposed.  Should the item no longer be
produced and the item is not repairable, a similar item will be substituted at the
manufacturers discretion.  The user must pay shipping to and from the authorized
Lenz GmbH warranty center during this portion of the warranty period.

Year 4-10:

  A minimal service charge will be placed on each item that has failed due

to manufacturer defects and/or accidental user installation problems.  Should the item
no longer be produced and the item is not repairable, a similar item will be substituted
at the manufacturers discretion.  The user must pay shipping to and from the
authorized Lenz GmbH warranty center during this portion of the warranty period.

Please contact your dealer or authorized Lenz GmbH warranty center for specific
instructions and current service charges prior to returning any equipment for repair.

Hüttenbergstraße 29

35398 Gießen, Germany

Hotline: 06403 900 133

Fax: 06403 5332

www.digital-plus.de

 http://www.lenz.com

Lenz Agency of North America

PO Box 143

Chelmsford, MA 01824

ph: 978 250 1494

fax: 978 455 LENZ
[email protected]

This equipment complies with Part 15 of FCC Rules.  Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

 Please save this manual for future reference!

© 2001 Lenz GmbH,  All Rights Reserved

Содержание Digital plus LE010XF













Отзывы: