This paper shredder is intended only for private use and for use in the office. It shreds 80 g/m²
paper with a width up to 220 mm.
• Unpack the unit carefully and remove all packing materials.
• Dispose of the packaging materials in an appropriate way. Ask your local authorities about
collection centres or waste separation.
• Check for completeness and shipping damage immediately after unpacking. If your shipment is
damaged or incomplete, please contact your dealer (→Guarantee).
• Please keep the original box. You can use it to store the equipment if it is not used for long
periods of time.
• Place the device on a flat, stable, fire-proof and splash-proof surface.
Assembly
• Place the collection container (4) on a flat stable surface.
• Place the shredding unit (5) securely on the collection container (4).
• Connect the mains plug (3) to a suitable wall socket.
INTENDED USE
5
Overheat protection
The unit will stop operating if:
• The maximum capacity is exceeded, for example, by putting more than 5 sheets of 80 g/m²
paper in one operation.
• A continuous shredding process takes more than 2 minutes.
• If the paper shredder is overheated, immediately switch it off and disconnect it from the power
supply.
• Wait for approx. 30 minutes till the unit has cooled to room temperature, before switching it on
again.
Paper jam
• Paper jams occur if more than 5 papers (80 g/m²) are put for destroying at the same time or if
the paper has not been correctly inserted into the paper tray (2).
• Push the switch
(1) to the position Rev.
• The cutting mechanism runs backward and the paper is guided out of the paper feeder (2).
• If the paper jam continues, switch off the paper shredder and disconnect it from the power
supply. Remove the paper residues manually.
• Connect the device to the power supply again and switch it on. The paper shredder is now
ready for operation again.
Cleaning and care
• Switch off the paper shredder by pushing the switch
(1)to the position Off and
disconnecting it from the power supply.
• Clean the housing with a slightly damp cloth.
• Never immerse the shredding unit (5) in water.
• Remove the paper residues and empty the collection container (4).
• Never use solvents or abrasive agents, hard brushes or metallic or sharp objects to clean the
unit.
• Store the appliance in a dry place away from dust and direct sunlight.
PROBLEM SOLVING
Содержание XS-510
Страница 1: ...Operation Instructions Model XS 510 ...