Installing the monitor driver in Windows 2000
Note:
This section must be completed before continuing with the Windows 2000
automatic image setup.
1.
Turn off the computer and all attached devices.
2.
Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow the system to boot into
Windows 2000.
4.
Open the
Display Properties
window by clicking
Start Settings Control
Panel
, select/enter into the
Display
control panel.
5.
Click the
Settings
tab.
6.
Click the
Advanced
button.
7.
Click the
Monitor
tab.
8.
Click the
Properties
button.
9.
Click the
Drivers
tab.
10.
Open the
Upgrade Device Driver Wizard
window by clicking on
Update
Driver
, and then click
Next
.
11.
Select
“Display a list of the known drivers for this device so that I can
choose a specific driver”
option, and then click
Next
.
12.
Click the
Have Disk
button. Click on the
Browse
button and navigate to the
following directory:
X:\Monitor Drivers\Windows XP & Windows 2000
(where
X
is the drive letter designator for the CD-ROM drive).
13.
Select the "
L193pC.inf
" file and click the
Open
button. Click on the
OK
button.
14.
Select
Lenovo L193pC
and click
Next
. The files will be copied from the CD
to your hard disk drive.
15.
Close all open windows and remove the CD.
16.
Restart the system.
Note:
On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1280 x 1024 at a refresh rate of 60
Hz, or 640 x 480 at a refresh rate of 60 Hz.
Chapter 3.
Reference information
3-7
