background image

Caring for your monitor

Be sure to turn off the power before you perform any maintenance on the monitor.

Do not:

·

Apply water or liquid directly to your monitor.

·

Use solvents or abrasives.

·

Use flammable cleaning materials to clean your monitor or any other electrical
equipment.

·

Touch the screen area of your monitor with sharp or abrasive items. This type of
contact may cause permanent damage to your screen.

·

Use any cleaner which contains an anti-static solution or similar additives. This
may harm the coating of the screen area.

Do:
·

Lightly dampen a soft cloth with water and use this to gently wipe the covers and
the screen.

·

Remove grease or finger marks with a damp cloth and a little mild detergent.

Chapter 2. Adjusting and using your monitor

2-8

For optimal performance, switch off your monitor at the end of each working day, or
whenever you expect to leave it unused for long periods during the day.

Table 2-4. Power indicator

State

Power Indicator

Screen

Restoring Operation

Compliance

On

Steady green

Normal

Standby/Suspend

Steady amber

Blank

Press a key or move the
mouse

There may be a slight

delay before the image

reappears.
Note: Standby also

occurs if there is no image
output to the monitor.

ENERGY STAR

Off

Off

Blank

Press a key or move the
mouse

There may be a slight

delay before the image

reappears.

ENERGY STAR

Содержание ThinkVision 4431-HB2











































Отзывы: