Lenovo ThinkSystem NE2572O, Руководство по установке

Страница: 29 / 84

© Copyright Lenovo 2018 Chapter 3: Installing NE2572O Hardware and Options
29
Required Tools
You need the following tools or equipment to install the NE2572O:
 Standard flat ‐ blade screwdriver
 #2 Phillips screwdriver
 Electrostatic discharge wrist strap
Package Contents
The basic NE2572O package contains the following items:
 One ThinkSystem NE2572O unit with rear ‐ to ‐ front airflow
 One two ‐ post mounting kit for standard 19” equipment racks:

Two mounting brackets

Screws to attach brackets to the switch unit

Screws to attach the switch unit to the equipment rack
 One console cable kit that includes:

One RJ45 to DB9 console cable

One Micro ‐ USB Type A to USB Type A cable
 One power cord retention bracket
 One Important Notices document
 One Warranty Information document
For a list of compatible switch components and options (such as rack ‐ mounting kits,
modules, cords, and cables), see the Lenovo Networking Catalog .
Environmental Requirements
This section describes the basic environmental requirements for the NE2572O.
Make sure the location where you install the switch meets the following
requirements:

Install the switch unit in a dry, clean, well ‐ ventilated area.

Provide adequate space in the front and back of the switch unit, to ensure proper
air flow.

Make sure that an adequate grounded power supply is within reach of the
switch unit.

Make sure that twisted ‐ pair cable is routed away from power lines, fluorescent
lighting fixtures and other sources of electrical interference.