Lenovo ThinkSystem HR650X, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 52 / 119

© Copyright Lenovo 2017
52
PSU Redundant Mode Non-redundant mode
Active/Active
Active/Passive
PSU Redundant Mode:
active/active or
active/passive.
RTC Wake system from
S4/S5 Disabled /Enabled Enable or disable System wake
on alarm event. When enabled,
System will wake on the
hr::min::sec specified
Wake on LAN from S5 Disabled /Enabled Enable/Disable LAN to wake the system
Restore AC Power Loss Power On/Power
Off/Last State/ Don't
Change
Select Power on , Power off ,Last State, or Keep
Current State.
Restore AC Power Loss
Current State
Power off
Processor Configuration Table(Sub of
Advanced Menu
)
Processor Configuration Processor Configuration
CPU1 Speed 2.400GHz
CPU2 Speed 2.400GHz
One blank line
Hyper-Threading [ALL] Disable/ Enable Enables Hyper Threading (Software Method to
Enable/Disable Logical Processor threads.
Socket0 Core Disable
Bitmap(Hex) 0 0: Enable all cores. FFFFFFF: Disable all cores
Socket1 Core Disable
Bitmap(Hex)
0 0: Enable all cores. FFFFFFF: Disable all cores
Hardware Prefetcher Enable /Disable = MLC Streamer Prefetcher (MSR 1A4h Bit[0])
Adjacent Cache Prefetch Enable /Disable = MLC Spatial Prefetcher (MSR 1A4h Bit[1])
DCU Streamer Prefetcher Enable /Disable DCU streamer prefetcher is an L1 data cache
prefetcher (MSR 1A4h [2]).
DCU IP Prefetcher Enable /Disable DCU IP prefetcher is an L1 data cache prefetcher
(MSR 1A4h [3]).
Monitor/Mwait Disable/ Enable Enable / Disable the Monitor/Mwait
QPI Link L0p Enable Disable /Enable Enable - Set the c_l0p_en, Disable - Reset it, Auto -
Auto decides based on Si Compatibility.
QPI Link L1 Enable Disable /Enable Enable - Set the c_l1_en, Disable - Reset it, Auto -
Auto decides based on Si Compatibility.
Link Frequency Select 9.6GB/s Allows for selecting the UPI Link Frequency