2.2.15
IN
Do not procee
To remove a
1.
Gently p
2. Rotate and
To reinstall, re
Special Note:
vacant hot-sw
2.2.15
IN
Do not procee
1. Slide the h
2. Connect th
NSTALLING
ed before reading
2.5/3.5-inch hot-s
push the release
d pull the handle t
everse the steps
: Install the hot-sw
wap drive bays.
NSTALLING
ed before reading
ot-swap power su
he power cord.
G
OR
REPL
g and understand
swap drive, do th
latch of the hot-s
Pu
to slide the drive
above.
wap drives into th
G
OR
REPL
g and understand
upply into the cha
LACING
A
H
ding the "Safety P
e following:
wap drive (See F
ushing the release
out of the chassis
Remo
he available bays
Order of insta
LACING
A
H
ding the "Safety P
assis until it snap
HOT
‐
SWAP
Precautions" secti
Figure below) to o
e latch of a 2.5/3.
s.
oving a 2.5/3.5-inc
in the order num
llation for 2.5/3.5-
HOT
‐
SWAP
Precautions" secti
s into position.
DRIVE
on of this chapte
open the handle o
5-inch hot-swap d
ch hot-swap drive
mbered in the diag
-inch hot-swap dr
POWER
SU
on of this chapte
r and "Read Me F
of the drive.
drive
e
grams below. Inst
rives
UPPLY
r and "Read Me F
First".
tall dummy trays i
First".
in all
29
