11
Statement 16
CAUTION: To reduce the risk of electric shock or energy hazards:
•This equipment must be installed by trained service personnel in a restricted-access location, as defined by your local electrical code and the latest
edition of IEC 60950.
•Connect the equipment to a reliably grounded safety extra low voltage (SELV) source. An SELV source is a secondary circuit that is designed so that
normal and single fault conditions do not cause the voltages to exceed a safe level (60 V direct current).
•The branch circuit overcurrent protection must be rated in accordance with local electrical code requirements.
•Use only 1.3 mm
2
or 16 American Wire Gauge (AWG) copper conductors, not exceeding 3 meters in length.
•Torque the wiring-terminal screws to 1.4 newton-meters (12 inch-pounds).
•Provide a readily available approved and rated disconnect device in the field wiring.
Statement 17
CAUTION:
This Product contains a Class 1M laser. Do not view directly with optical instruments.
Statement 18
CAUTION:
Do not place any object on top of rack-mounted products.
Statement 19
CAUTION: Hazardous moving parts. Keep fingers and other body parts aw
Statement 20
The device is equipped with a replaceable battery. Using an incorrect battery may present a risk of explosion.
Caution: Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries as instructed.
Statement 21
This device is not intended for use in the direct field of view at visual display workplaces. To avoid incommoding reflexions at visual display workplaces
this device must not be placed in the direct field of view.
