Lenovo ThinkSystem 1610-4P, Инструкция по установке и эксплуатации

Страница: 9 / 23

- 9 -
ThinkSystem 1610-4P NVMe Switch Adapter Installation and User Guide
February 28, 2018 Chapter 2: Overview
Operating System Support
2.3.3 LED Management
The internal-connector ThinkSystem 1610-4P NVMe switch adapter offers LED management support for your
backplane implementation. This configuration option lets you use the adapter with backplanes configured for the I
2
C
interface. The adapter complies with the I
2
C-bus specification and user manual Rev. 6 — 4.
The adapter offers enclosure LED management support for your enclosure implementation through I
2
C management.
2.4 Operating System Support
The ThinkSystem 1610-4P NVMe switch adapter supports all major operating systems. Refer to
http://support.lenovo.com for details on the software versions and device driver support.
2.5 ThinkSystem 1610-4P NVMe Switch Adapter Characteristics
2.5.1 Flash Memory
The ThinkSystem 1610-4P NVMe switch adapter provides a 128-MB Flash memory device for storing the BCM58512
CPU BIOS and firmware.
2.5.2 Physical Characteristics
The ThinkSystem 1610-4P NVMe switch adapter is a 6.6 in. × 2.7 in. (167.65 mm × 68.90 mm) board. The component
height on the top and bottom of the adapter complies with the PCIe specification. The following figure shows the
ThinkSystem 1610-4P NVMe switch adapter layout.
Figure 5 ThinkSystem 1610-4P NVMe Switch Adapter Layout

J1 – SFF-8643 mini-SAS HD internal connectors

U5 – PCIe x16 board edge connector
3_03265
J1
U5
C0
C1
C2
C3