Lenovo ThinkStation P920 Скачать руководство пользователя страница 221

Страница: 221 / 246

Chapter 10. Getting information, help, and service

This chapter provides information about getting help and support from Lenovo.

Information resources

You can use the information in this section to access useful resources relating to your computing needs.

Accessing the user guide in various languages

To access the user guide in various languages, go to:

http://www.lenovo.com/support

Windows help system

The Windows help system provides you with detailed information about using the Windows operating
system.

To access the Windows help system, do the following:

1. Click the Start button to open the Start menu.

2. Depending on your Windows version, do one of the following:

• For Windows 7: Click

Help and Support

. You can choose to use the online or offline help at the

bottom of the screen.

• For Windows 10: Click

Get Help

Note:

Using online help for Windows 7 or the help for Windows 10 requires an active Internet connection.

Safety and warranty

The

Safety, Warranty, and Setup Guide

provided with your computer contains important safety information,

product warranty terms, initial setup procedure, and legal notices. Ensure that you read and understand all
safety information in the

Safety, Warranty, and Setup Guide

before using your computer.

In addition, read and understand Chapter 1 “Read this first: Important safety information” on page 1 before
using your computer. This preface provides additional safety information that applies to topics and tasks
described in this

User Guide

Lenovo Web site

The Lenovo Web site (

http://www.lenovo.com

) provides up-to-date information and services to help you buy,

upgrade, and maintain your computer. You also can do the following:

• Shop for desktop and notebook computers, monitors, projectors, upgrades, and accessories for your

computer, and special offers.

• Purchase additional services, such as support for hardware, operating systems, programs, network setup

and configuration, and custom installations.

• Purchase upgrades and extended hardware repair services.

• Access troubleshooting and support information for your computer model and other supported products.

• Find a Service Provider located near you.

213

Содержание ThinkStation P920























































































































































































































































Результаты поиска

Содержание ThinkStation P920

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinkStation P920, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkStation P920

Отзывы:

Бренды по названию

Популярные бренды