Lenovo ThinkStation P920 Скачать руководство пользователя страница 171

Страница: 171 / 246

Pivot the tab

downward until it snaps into position.

Figure 117. Closing the card latch

7. Reinstall the direct cooling air baffle if you have removed it. See “Direct cooling air baffle” on page 107.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 210.

Full-length PCIe card

Attention:

Do not open your computer or attempt any repair before reading and understanding the Chapter

1 “Read this first: Important safety information” on page 1.

Your computer has the following PCIe card slots:

• PCIe 3.0 x4 card slots

• PCIe 3.0 x16 card slots

Notes:

• The full-length PCIe card is available only on some models.

• If you want to use an NVIDIA compute card, ensure that your computer also has an NVIDIA graphics card

installed.

PCIe card installation rules

Install PCIe cards in the alphabetic order as shown.

Chapter 9

Hardware removal and installation

163

Содержание ThinkStation P920























































































































































































































































Результаты поиска

Содержание ThinkStation P920

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinkStation P920, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkStation P920

Отзывы:

Бренды по названию

Популярные бренды