Lenovo ThinkStation P500 Скачать руководство пользователя страница 74

Страница: 74 / 232

Selecting a startup device

If your computer does not start up from a device as expected, do one of the following to select the startup
device you want.

Selecting a temporary startup device

Use this procedure to select a temporary startup device.

Note:

Not all discs and hard disk drives are bootable.

1. Turn on or restart your computer.

2. When you see the logo screen, repeatedly press and release the F12 key. The Startup Device Menu

window is displayed.

3. Select the desired startup device and press Enter. The computer will start up from the device you

selected.

Note:

Selecting a startup device from the Startup Device Menu window does not permanently change

the startup sequence.

Selecting or changing the startup device sequence

To view or permanently change the configured startup device sequence, do the following:

1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 65.

2. From the Setup Utility program main menu, select

Startup

3. Select the devices for the Primary Startup Sequence, the Automatic Startup Sequence, and the Error

Startup Sequence. Read the information displayed on the right side of the screen.

4. Press F10 to save changes and exit the Setup Utility program. See “Exiting the Setup Utility program”

on page 69.

Enabling ErP LPS compliance mode

Lenovo computers meet the eco-design requirements of the ErP Lot 3 regulation. For more information, go
to:
http://www.lenovo.com/ecodeclaration

You can enable ErP LPS compliance mode in the Setup Utility program to reduce the consumption of
electricity when your computer is off or in sleep mode.

To enable ErP LPS compliance mode in the Setup Utility program, do the following:

1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 65.

2. From the Setup Utility program main menu, select

Power

➙

Enhanced Power Saving Mode

, and

press Enter.

3. Select

Enabled

and press Enter.

4. From the

Power

menu, select

Automatic Power On

and press Enter.

5. Select

Wake on Lan

and press Enter.

6. Select

Disabled

and press Enter.

7. Press F10 to save changes and exit the Setup Utility program. Press Enter when prompted to confirm

the exit.

When ErP LPS compliance mode is enabled, you can wake up your computer by doing one of the following:

• Press the power button

• Enable the wake up on alarm feature

ThinkStation P500 and P700 Hardware Maintenance Manual

Содержание ThinkStation P500









































































































































































































































Результаты поиска

Содержание ThinkStation P500

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinkStation P500, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkStation P500

Отзывы:

Бренды по названию

Популярные бренды