Lenovo ThinkStation P500 Скачать руководство пользователя страница 170

Страница: 170 / 232

• If you are replacing an old PCI card, grasp the old card that is currently installed and gently pull it

out of the slot.

Notes:

– If the PCI card is connected to another device, disconnect the cable from the card first.

– The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small

amount until it is removed from the card slot.

– If the card is held in place by a retaining latch, press the card retaining latch

as shown to

disengage the latch. Grasp the card and gently pull it out of the slot.

Figure 100. Removing a PCI card

7. Remove the new PCI card from its static-protective package.

8. Install the new card into the appropriate slot on the system board. See “Locating parts on the system

board” on page 35.

Note:

If the new PCI card needs to be connected to another device, connect the cable of the device

to the new PCI card.

9. Pivot the PCI card latch to the right and push it back in until it snaps into position.

164

ThinkStation P500 and P700 Hardware Maintenance Manual

Содержание ThinkStation P500









































































































































































































































Результаты поиска

Содержание ThinkStation P500

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinkStation P500, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkStation P500

Отзывы:

Бренды по названию

Популярные бренды