• Type-2:
a. Remove the four screws that secure the heat-sink-and-fan assembly to the chassis. Then, follow
the following sequence to loosen the four screws that secure the heat-sink-and-fan assembly to
the system board. Then, lift the heat-sink-and-fan assembly off the system board.
– Partially loosen screw
2a
, fully loosen screw
2b
, and then fully loosen screw
2a
.
– Partially loosen screw
2c
, fully loosen screw
2d
, and then fully loosen screw
2c
.
Notes:
– Carefully loosen the four screws to avoid any possible damage to the system board. The four
screws cannot be removed from the heat-sink-and-fan assembly.
– You might have to gently twist the heat-sink-and-fan assembly to free it from the
microprocessor.
– Do not touch the thermal grease while handling the heat-sink-and-fan assembly.
– In case you need to remove the chassis beam as well, ensure that this type-2 heat-sink-and-fan
assembly has been removed before you remove the chassis beam.
92
P340 User Guide
Содержание ThinkStation P340
