Lenovo ThinkStation 1095 Скачать руководство пользователя страница 62

Страница: 62 / 136

8. Insert the two tabs

on the new front fan assembly bracket into the corresponding holes in the chassis,

and then press the two tabs through the holes until the bracket is secured in place.

Figure 35. Installing the front fan assembly

9. Connect the front fan assembly cable to the front fan connector on the system board.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 57.

Replacing the rear fan assembly

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important

safety information” on page v.

This section provides instructions on how to replace the rear fan assembly.

To replace the rear fan assembly, do the following:

1. Turn off the computer and disconnect all power cords from electrical outlets.

2. Remove the computer cover. See “Removing the computer cover” on page 30.

ThinkStation User Guide

Содержание ThinkStation 1095









































































































































Результаты поиска

Содержание ThinkStation 1095

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinkStation 1095, Руководство пользователя

Результаты поиска

Содержание ThinkStation 1095

Отзывы:

Бренды по названию

Популярные бренды