Lenovo ThinkStation 1095 Скачать руководство пользователя страница 43

Страница: 43 / 136

Removing and reinstalling the front bezel

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important

safety information” on page v.

This section provides instructions on how to remove and reinstall the front bezel.

To remove and reinstall the front bezel, do the following:

1. Turn off the computer and disconnect all power cords from electrical outlets.

2. Remove the computer cover. See “Removing the computer cover” on page 30.

3. Remove the front bezel by releasing the two plastic tabs on the left side and pivoting the front bezel

outward.

Figure 11. Removing the front bezel

4. To reinstall the front bezel, align the three plastic tabs on the right side of the front bezel with the

corresponding holes in the chassis, then pivot the front bezel inwards until it snaps into position on
the left side.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 57.

Removing and reinstalling the PCI card holder

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important

safety information” on page v.

Chapter 5

Installing or replacing hardware

Содержание ThinkStation 1095









































































































































Результаты поиска

Содержание ThinkStation 1095

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinkStation 1095, Руководство пользователя

Результаты поиска

Содержание ThinkStation 1095

Отзывы:

Бренды по названию

Популярные бренды