Lenovo ThinkStation 1095 Скачать руководство пользователя страница 58

Страница: 58 / 136

Note:

If you are installing a SAS hard disk drive, you need to connect the signal cable and power cable

to the SAS-to-SATA adapter and then connect the adapter to the SAS hard disk drive.

Figure 31. Connecting a SAS hard disk drive

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 57.

Installing or replacing a hard disk drive enablement module

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important

safety information” on page v.

This section provides instructions on how to install or replace a hard disk drive enablement module.

To install or replace a hard disk drive enablement module, do the following:

1. Turn off the computer and disconnect all power cords from electrical outlets.

2. Remove the computer cover. See “Removing the computer cover” on page 30.

3. Lay the computer on its side for easier access to the system board.

4. Remove the PCI card holder. See “Removing and reinstalling the PCI card holder” on page 31.

5. Remove the front fan assembly for easier access to the hard disk drive enablement module. See

“Replacing the front fan assembly” on page 48.

6. Locate the hard disk drive enablement module on the system board. See “Locating parts on the

system board” on page 11.

ThinkStation User Guide

Содержание ThinkStation 1095









































































































































Результаты поиска

Содержание ThinkStation 1095

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinkStation 1095, Руководство пользователя

Результаты поиска

Содержание ThinkStation 1095

Отзывы:

Бренды по названию

Популярные бренды