Lenovo ThinkPad T540p, Руководство пользователя

Страница: 51 / 194

Maximizing the battery life
To maximize the life of the battery, do the following:
• Use the battery until the charge is completely depleted.
• Recharge the battery completely before using it. You can see whether the battery is fully charged from the
battery status icon in the Windows notification area.
• Always use power management features such as power-saving modes.
Managing the power plans
To achieve the best balance between performance and power saving, adjust your power plan settings.
To access power plan settings, do the following:
1. For Windows 7: Start the Power Manager program and then click Power Plan or Advanced ➙ Power
Plan . For instructions on how to start the Power Manager program, see “Accessing Lenovo programs on
the Windows 7 operating system” on page 15.
2. For Windows 8 and Windows 8.1: Right-click the battery status icon in the windows notification area
and click Power Options , click Change plan settings that is next to your power plan.
For more information about the Power Manager program, refer to the help information system.
Power-saving modes
There are several modes that you can use at any time to conserve power. This section introduces each
mode and gives tips on the effective use of battery power.
• Screen blank mode (for Windows 7 only)
The computer display requires considerable battery power. To turn off the power to the display and make
the computer enter screen blank mode, right-click the battery gauge icon in the windows notification area
and select
Power off display .
• Sleep mode
In sleep mode, your work is saved to memory, and then the solid-state drive or the hard disk drive and the
computer display are turned off. When your computer wakes up, your work is restored within seconds.
Depending on the model, your computer might support the 30 Day Standby function. When this function
is enabled, the computer consumes even less power in sleep mode and takes only seconds to resume
normal operation when you press the power button. For more information about the 30 Day Standby
function, do the following:
– For Windows 7: Refer to the help information system of the Power Manager program. For instructions
on how to start the Power Manager program, see “Accessing Lenovo programs on the Windows 7
operating system” on page 15.
– For Windows 8 and Windows 8.1: Open the Lenovo Settings program and click Power
➙
30 Day
Standby .
To put your computer into sleep mode, do the following:
– For Windows 7: Use the Start menu shutdown option.
– For Windows 8 and Windows 8.1: Move the cursor to the top-right or bottom-right corner of the screen
to bring up the charms. Then click Settings ➙ Power ➙ Sleep .
• Hibernation mode
By using this mode, you can turn off your computer completely without saving files or exiting any
programs that are running. When the computer enters hibernation mode, all open programs, folders, and
files are saved to the hard disk drive or solid-state drive, and then the computer turns off.
Chapter 2
.
Using your computer
35