Lenovo ThinkPad T430u, Руководство пользователя

Страница: 135 / 162

• Problem : Wrong characters are displayed on the screen.
Solution : Did you follow the correct procedure when installing the operating system or application
program? If you did, have the external monitor serviced.
• Problem : The Extend desktop function does not work.
Solution : Enable the Extend desktop function by doing the following:
1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical
outlet.
2. Turn on the external monitor and the computer.
3. Right-click on the desktop, and click Screen resolution .
4. Click the Monitor-2 icon.
5. Select Extend these displays for multiple displays.
6. Click the Monitor-1 icon (for the primary display, the computer display).
7. Set the resolution for the primary display.
8. Click the Monitor-2 icon (for the external monitor).
9. Set the screen resolution for the secondary display.
10. Set the relative position of each monitor by dragging its icon. You can set the monitors in any relative
position, but the icons must touch each other.
11. Click OK to apply the changes.
Note: To change the color settings, right-click on the desktop, and click Screen resolution . Click
Advanced Settings , select the Monitor tab, then set Colors .
• Problem : If you use the Extend desktop function, you cannot set a higher resolution or higher refresh
rate on the secondary display.
Solution : Change the resolution and the color depth to lower settings for the primary display. Refer
to the solution to the above problem.
• Problem : Display switching does not work.
Solution : If you use the Extend desktop function, disable it, and change the display output location. If
a DVD movie or a video clip is playing, stop the playback, close the application, and then change the
display output location.
• Problem : The screen position on the external monitor is incorrect when that monitor is set for a high
resolution.
Solution : Sometimes, when you use a high resolution such as 1600x1200, the image is shifted to left or
right on the screen. To correct this, first make sure that your external monitor supports the display mode
(the resolution and the refresh rate) that you have set. If it does not, set a display mode that the monitor
supports. If it does support the display mode you have set, go to the setup menu for the monitor itself
and adjust the settings there. Usually the external monitor has buttons for access to the setup menu. For
details, see the documentation that comes with the monitor.
Audio problems
• Problem : Wave or MIDI sound does not play correctly.
Solution : Make sure that the built-in audio device is configured correctly.
1. Click Start
➙
Control Panel .
2. Click Hardware and Sound .
Chapter 9
.
Troubleshooting computer problems
119