Lenovo Thinkpad 300, Руководство по обслуживанию

Страница: 47 / 93

Step 11. Reattach the EMI cover, rear cover, hinge, foot cover and stand base.
Replacing the system fan
Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To replace the system fan
Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4. Remove the stand base. Refer to “Removing the stand base”.
Step 5. Remove the foot cover. Refer to “Removing the foot cover”.
Step 6. Remove the hinge. Refer to “Removing the hinge”.
Step 7. Remove the rear cover. Refer to “Removing the rear cover”.
Step 8. Remove the EMI cover. Refer to “Removing the EMI cover”.
Step 9. Remove the three screws that secure the system fan to the chassis.
Step 10. Disconnect the power cable from the motherboard.
Step 11. Lift up the system fan to remove it.
Step 12. To install the new system fan:
a. Place the new system fan into position, and then secure it to the chassis with three screws.
Chapter 8
.
Replacing hardware
41