Lenovo ThinkCentre Edge 72z Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 142

background image

4. Select the

Playback

tab.

5. If you are using Headset profile, select

Bluetooth Hands-free Audio

and click the

Set Default

button. If

you are using AV profile, select

Stereo Audio

and click the

Set Default

button.

6. Click

OK

to close the Sound window.

PIM items sent from the Windows 7 operating system cannot be received correctly

Symptom: Personal Information Manager (PIM) items sent from the Windows 7 operating system cannot be
received correctly into the address book of any other Bluetooth-enabled device.

Action: The Windows 7 operating system sends PIM items in XML format, but most Bluetooth-enabled
devices handle PIM items in vCard format. If another Bluetooth-enabled device can receive a file through
Bluetooth, a PIM item sent from the Windows 7 operating system system might be saved as a file with
the extension contact.

Option problems

Use this information to diagnose problems with Lenovo hardware options that do not have their own
troubleshooting information.

Select your symptom from the following list:

•

“An option that was just installed does not work” on page 47

•

“An option that previously worked does not work now” on page 47

An option that was just installed does not work

Symptom: An option that was just installed does not work.

Action: Verify that:

• The option is designed for your computer.

• You followed the installation instructions supplied with the option and the installation instructions provided

with your computer, and all option files (such as device drivers, if required) are installed correctly.

• You have not loosened other installed options or cables.

• If the option is an adapter, you have provided enough hardware resources for the adapter to function

correctly. See the documentation supplied with the adapter (as well as the documentation for any other
installed adapters) to determine the resources required for each adapter.

If these actions do not correct the problem, run the diagnostic programs (see “Diagnostics” on page 51 for
instructions). If you need technical assistance, see “Additional information resources” on page 31.

An option that previously worked does not work now

Symptom: An option that previously worked does not work now.

Actions:

• Verify that all option hardware and cable connections are secure.

• If the option comes with its own test instructions, use those instructions to test the option.

• If the failing option is a SCSI option, verify that:

– The cables for all external SCSI options are connected correctly.

– The last option in each SCSI chain, or the end of the SCSI cable, is terminated correctly.

– All external SCSI options are turned on. External SCSI options must be turned on before the computer

is turned on. For more information, see your SCSI documentation.

Chapter 5

.

Troubleshooting and diagnostics

47

«
...
51
52
53
54
55
...
»

Содержание ThinkCentre Edge 72z















































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkCentre Edge 72z

Бренд: Canon Страницы: 5

XN200 series XN-004-A1

Бренд: Xtore Страницы: 4

XN200 series XN-004-A1

Бренд: Xtore Страницы: 7

Бренд: KIP Страницы: 22

Бренд: CSSN Страницы: 8

Бренд: Acuma Labs Страницы: 20

38000827 - Macromedia ColdFusion MX Standard Edition

Бренд: Adobe Страницы: 68

Certificate Management System 6.2

Бренд: Netscape Страницы: 874

COLDFUSION 5 - INSTALING AND CONFIGURING...

Бренд: MACROMEDIA Страницы: 160

GZ-MG77 - Camcorder - 2.2 MP

Бренд: JVC Страницы: 72

ST905003BPA1E1-RK - Maxtor BlackArmor 500 GB External Hard Drive

Бренд: Seagate Страницы: 2

FLASH 8-ACTIONSCRIPT 2.0 LANGUAGE

Бренд: MACROMEDIA Страницы: 1378

DS 20 - 128 MB Digital Voice Recorder

Бренд: Olympus Страницы: 48

Бренд: ESET Страницы: 38

Remote Client 4.0.1

Бренд: Q-See Страницы: 72

Бренд: Nexo Страницы: 24

NAVIGATOR 380 -

Бренд: Genius Страницы: 26

Бренд: Yamaha Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды