Lenovo THINK STATION 4262 Скачать руководство пользователя страница 61

Страница: 61 / 86

Installing SATA or SAS hard disk drives

Your computer must have the minimum number of SATA or SAS hard disk drives installed for the supported
level of RAID below:

• RAID Level 0 – Striped disk array

– Two hard disk drives minimum

– Better performance without fault tolerance

• RAID Level 1 – Mirrored disk array

– Two hard disk drives minimum

– Improved read performance and 100% redundancy

• RAID Level 5 – Block-level striped disk array with distributed parity

– Three hard disk drives minimum

– Data striped at the byte level

– Stripe error correction information

– Better performance and fault tolerance

To install a new SATA or SAS hard disk drive, see “Installing a new hard disk drive” on page 23.

Entering the Marvell BIOS Setup to configure SATA or SAS RAID

This section describes how to enter the Marvell BIOS Setup to configure a SATA or SAS RAID.

1. Turn on the computer after you have installed the required number of SATA or SAS hard disk drives.

2. Press Ctrl+M when prompted to enter the Marvell BIOS Setup to configure SATA/SAS RAID.

Configuring the Marvell BIOS Setup to enable SATA/SAS RAID 0, 1, or 5
functionality

This section provides instructions on how to enable SATA/SAS RAID functionality.

To enable SATA/SAS RAID functionality, use the Marvell BIOS Setup configuration utility as the SATA/SAS
configuration utility. This utility assumes that the system has the required number of hard disk drives installed.

1. Turn on your computer and press Ctrl+M when prompted to enter the Marvell BIOS Setup.

2. On the Marvell BIOS Setup screen, use the arrow keys to select

RAID

and press Enter. The

RAID

Config

menu opens.

3. From the

RAID Config

menu, select

Create array

4. Use the arrow keys and the Enter key to select each free hard disk drive that you want to include

in the array.

5. Select

Next

and press Enter.

6. From the

Create array

menu, select

RAID level

and press Enter.

Note:

Only the valid RAID levels will be active.

7. Select your desired RAID level (

RAID 0

RAID 1

, or

RAID 5

) and press Enter.

8. From the

Stripe Size

menu, you can change the stripe size or keep it as default.

9. Type a proper array name in the

Array Name

field.

10. Select

Next

and press Enter.

11. When prompted, press Y to complete the array creation and RAID configuration.

Chapter 5

Configuring RAID

Содержание THINK STATION 4262























































































Результаты поиска

Содержание THINK STATION 4262

Отзывы:

Бренды по названию

Популярные бренды

Lenovo THINK STATION 4262, Руководство пользователя

Результаты поиска

Содержание THINK STATION 4262

Отзывы:

Бренды по названию

Популярные бренды