Lenovo THINK STATION 4262 Скачать руководство пользователя страница 40

Страница: 40 / 86

7. Insert the two tabs

on the new front fan assembly bracket into the corresponding holes in the chassis,

and then press the two tabs through the holes until the bracket is secured in place.

Figure 30. Installing the new front fan assembly bracket

8. Connect the front fan assembly cable to the front fan connector on the system board. See “Locating

parts and connectors on the system board” on page 9.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 37.

Replacing the rear fan assembly

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important safety

information” in the

ThinkStation Safety and Warranty Guide

that came with your computer. To obtain a copy of the

ThinkStation Safety and Warranty Guide

, go to:

http://support.lenovo.com

This section provides instructions on how to replace the rear fan assembly.

Note:

Your computer supports two rear fan assemblies.

ThinkStation User Guide

Содержание THINK STATION 4262























































































Результаты поиска

Содержание THINK STATION 4262

Отзывы:

Бренды по названию

Популярные бренды

Lenovo THINK STATION 4262, Руководство пользователя

Результаты поиска

Содержание THINK STATION 4262

Отзывы:

Бренды по названию

Популярные бренды