Lenovo SI4093 Скачать руководство пользователя страница 8

Страница: 8 / 66

SI4093 System Interconnect Module User’s Guide

Statement 3

CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:



Do not remove the covers. Removing the covers of the laser product could
result in exposure to hazardous laser radiation. There are no serviceable parts
inside the device.



Use of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.

DANGER

Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
Appareil À Laser de Classe 1

Statement 25

CAUTION:
This product contains a Class 1M laser. Do not view directly with optical
instruments.

UL Regulatory Information

This device is for use only with listed Lenovo Flex System Enterprise Chassis.

Some laser products contain an embedded Class 3A or Class 3B laser diode.
Note the following.

Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.

Содержание SI4093



































































Результаты поиска

Содержание SI4093

Отзывы:

Похожие инструкции для SI4093

Бренды по названию

Популярные бренды

Lenovo SI4093, Руководство пользователя

Результаты поиска

Содержание SI4093

Отзывы:

Похожие инструкции для SI4093

Бренды по названию

Популярные бренды