Lenovo RackSwitch G8052, Руководство по установке

Страница: 16 / 86

16
RackSwitch G8052 Installation Guide
Notices and Statements in this Document
The
caution
and
danger
statements in this document are also in the multilingual
Safety Information
document, which is on the included
Documentation
CD. Each
statement is numbered for reference to the corresponding statement in the
Safety
Information
document.
The following notices and statements are used in this document:
•
Note:
These notices provide important tips, guidance, or advice.
•
Important:
These notices provide information or advice that might help you
avoid inconvenient or problem situations.
•
Attention:
These notices indicate potential damage to programs, devices, or
data. An attention notice is placed just before the instruction or situation in which
damage could occur.
•
Caution:
These statements indicate situations that can be potentially hazardous
to you. A caution statement is placed just before the description of a potentially
hazardous procedure step or situation.
•
Danger:
These statements indicate situations that can be potentially lethal or
extremely hazardous to you. A danger statement is placed just before the
description of a potentially lethal or extremely hazardous procedure step or
situation.
The Documentation CD
The included
Documentation
CD contains documentation for your switch in Portable
Document Format (PDF).
The
Documentation
CD includes the product
Safety Information
document and the
License Machine Access Code (LAMC) document. The
Environmental Notices
CD
includes the Environmental Notices for the product.
The
Documentation
CD requires the following minimum hardware and software:
• Microsoft Windows NT 4.0 (with Service Pack 3 or later), Windows 2000, or Red
Hat Linux.
• 100 MHz microprocessor.
• 32 MB of RAM.
• Adobe Acrobat Reader 3.0 (or later), or xpdf (which comes with Linux operating
systems). PDF reader software is required for reading documents on the CD.
To access the documents on the CD:
•
If you are using a Windows operating system, insert the CD into the CD or DVD
drive and from My Computer, double click the CD or DVD drive, then open the
folders and documents that support your product.
• If you are using a Linux operating system, insert the CD into the CD or DVD drive
and run the following command from the
mnt/cd
directory:
sh.linux.sh
When the CD is mounted, open the directories and documents that support your
product.