Lenovo F0BD, Руководство по техническому обслуживанию аппаратной части

Страница: 44 / 77

Step 9. Disconnect the antenna cables from the Wi-Fi card. 1
Step 10. Remove the screw that secures the Wi-Fi card to the motherboard. 2
Step 11. Lift up the Wi-Fi card to remove it from the socket.
Step 12. To install the new Wi-Fi card:
a. Insert the notched end of the Wi-Fi card into the card port on the motherboard.
b. Secure new the Wi-Fi card to the motherboard with the screw.
c. Connect the antenna cables to the new Wi-Fi card.
Step 13. Reattach the EMI cover, middle cover, stand holder, foot cover and stand base.
Replacing the heat-sink
Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To replace the heat-sink:
Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4. Remove the stand base. Refer to “Removing the stand base”.
Step 5. Remove the foot cover. Refer to “Removing the foot cover”.
Step 6. Remove the optical drive. Refer to “Replacing the optical drive”.
Step 7. Remove the stand holder. Refer to “Removing the stand holder”.
38
ideacentre All-In-One 700 Hardware Maintenance Manual