2-6
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-
attach the CRT monitor temporarily until you have re-configured the system;
preferably to 1680 x 1050 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Addressability
Refresh rate
NTSC VGA
60 Hz
PAL VGA
50 Hz
640 x 350
70 Hz
640 x 480
60 Hz, 72 Hz, 75 Hz
720 x 400
70 Hz
800 x 600
56Hz, 60 Hz, 75 Hz
832 x 624
75 Hz
1152 x 864
75 Hz
1024 x 768
60 Hz, 70 Hz, 75 Hz
1280 x 1024
60 Hz, 70 Hz, 75 Hz
1680
x 1050
60 Hz
D22
Wide Flat Panel Monitor User’s Guide
2
