Lenovo Aptiva Скачать руководство пользователя страница 84

Страница: 84 / 464

Front bezel

To remove the front blank bezel:

1. Remove the top cover.

2. Remove the front panel.

3. Unlatch the tabs of the bezel and remove it from the

panel.

EMC shield

Diskette/hard drive bracket

To remove the diskette/hard drive bracket:

1. Remove the top cover.

2. Remove the diskette and hard drives or disconnect

their cables.

3. Remove the two top screws securing the bracket.

4. Slide bracket toward the back of the chassis to

unlatch it from the chassis.

5. Lift the bracket out of the chassis.

IBM PC 300/IntelliStation/Aptiva Vol 2 HMM

Содержание Aptiva

















































































































































































































































































































































































































































































Результаты поиска

Содержание Aptiva

Отзывы:

Lenovo Aptiva, Руководство по техническому обслуживанию аппаратной части, Страница: 84 / 464

Результаты поиска

Содержание Aptiva

Отзывы: