manualshive.com logo in svg

Lenovo Aptiva, Руководство по техническому обслуживанию аппаратной части, Страница: 164 / 464

Поделиться
Скачать
Lenovo Aptiva Скачать руководство пользователя страница 164

      

 

Flash (BIOS/VPD) update procedure

 Attention 

Refer to the information label located inside the
system unit cover for any model-specific information.

1. Power-off the computer.
2. Insert the flash update diskette into drive A.
3. Power-on the computer.
4. When the Update Utility appears; select your

country/keyboard, then press Enter.

5. If the computer serial number was previously

recorded, the number is displayed with an option to
update it. Press Y to update the serial number.

6. Type the 7-digit serial number of the computer you

are servicing; then, press Enter.

7. Follow the instructions on the screen to complete the

flash (BIOS/VPD) update procedure.

Flash recovery boot block

 Attention 

If an interruption occurs during a Flash/BIOS upgrade,
the BIOS might be left in an unusable state. The
CMOS switch enables you to restart the system and
recover the BIOS.

To perform a Flash/BIOS recovery using the CMOS switch:

1. Power-off the computer and remove the cover.
2. Move the system board CMOS switch to the on

position. Refer to “System board layout” on
page 176 or the information label inside the computer
for more information.

3. Insert the upgrade diskette into the diskette drive.
4. Power-on the computer. The IBM Logo will appear.
5. When the Flash Update Utility appears; select your

country/keyboard, then press Enter.

6. If the computer serial number was previously

recorded, the number is displayed with an option to
update it. Press Y to update the serial number.

7. Type the 7-digit serial number of the computer you

are servicing; then, press Enter.

8. Follow the instructions on the screen to complete the

flash (BIOS/VPD) update procedure.

9. When you are instructed to reboot the computer,

power-off the computer and move the CMOS switch
to the off position. Then, replace the cover and
power-on the computer.

154

IBM PC 300/IntelliStation/Aptiva Vol 2 HMM 

 

Содержание Aptiva

















































































































































































































































































































































































































































































Отзывы:

Нет отзывов