manualshive.com logo in svg

Lenovo Aptiva, Руководство по техническому обслуживанию аппаратной части, Страница: 366 / 464

Поделиться
Скачать
Lenovo Aptiva Скачать руководство пользователя страница 366

      

 

computer is restarted. In a network environment, this
might prevent certain functions from being performed
on the computer.

Remote Administration is locked and cannot be

unlocked until Enhanced Security is disabled and the
computer is restarted. This prevents the system
programs in the computer from being updated
remotely.

The configuration settings in the Configuration/Setup

Utility program are protected and cannot be changed
until the administrator password has been entered.
Any changes in computer hardware detected by the
system programs in the computer will generate a
configuration error until the administrator password
has been entered.

To enable or disable Enhanced Security:

1. Insert a system programs update diskette into the

diskette drive (drive A). System programs updates
are available at http://www.ibm.com/pc/support/us/
on the World Wide Web.

2. Power-on the computer. If it is powered on, you must

power-off then power-on.

3. The update begins, the computer halts, and you are

prompted for the administrator password (if you have
set an administrator password). The computer
remains in a halted state until the administrator
password is entered.

4. When the administrator password is entered, or if no

administrator password has been set, the update
diskette will continue to run, and you are given the
option of enabling or disabling Enhanced Security.
The choice is automatically recorded in the System
Security menu of the Configuration/Setup Utility
program.

 Network settings

This section applies only to computers linked to a network.

The Configuration/Setup Utility program includes settings
that can be enabled and disabled to configure the network
interface in the computer. These settings are:

Flash over LAN (Update POST/BIOS over Network)
Wake on LAN

Flash over LAN (update POST/BIOS
over network)

Note:  For local Flash (BIOS/VPD) update, see “Flash
(BIOS/VPD) update procedure” on page 352.

This setting is used to enable or disable the Flash over
LAN feature. When the feature is enabled, the system
programs, in the computer, can be updated remotely from

356

IBM PC 300/IntelliStation/Aptiva Vol 2 HMM 

 

Содержание Aptiva

















































































































































































































































































































































































































































































Отзывы:

Нет отзывов