Lenovo 70F0 Скачать руководство пользователя страница 54

Страница: 54 / 96

4. Connect the power cord to the power cord connector on the new power supply. Then, check the status

LED on the front panel. See “LEDs on the front panel” on page 15.

5. If you are instructed to return the failing power supply, follow all packaging instructions and use any

packaging materials that are supplied to you for shipping.

Replacing the fan assembly

Attention:

Do not open your storage array or attempt any repair before reading and understanding the “Safety

information” on page iii and “Guidelines” on page 31.

This topic provides instructions on how to replace the fan assembly.

CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Notes:

• Depending on the model, your storage array might look slightly different from the illustrations in this topic.

• Use any documentation that comes with the new fan assembly and follow those instructions in addition to

the instructions in this topic.

• Ensure that both fan assemblies are working correctly. Replace the failing fan assembly to avoid

overheating problems.

To replace the fan assembly, do the following:

1. Disconnect all power cords from electrical outlets and disconnect all cables that are connected to

the storage array.

2. Locate the failing fan assembly. See “Storage array components” on page 12.

3. Loosen the screws

and pull the two screws outward to remove the failing fan assembly out of the

chassis.

ThinkServer Storage SA120 User Guide and Hardware Maintenance Manual

Содержание 70F0

































































































Результаты поиска

Содержание 70F0

Отзывы:

Похожие инструкции для 70F0

Бренды по названию

Популярные бренды

Lenovo 70F0, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Результаты поиска

Содержание 70F0

Отзывы:

Похожие инструкции для 70F0

Бренды по названию

Популярные бренды