Lenovo 70AL Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 190

Lenovo 70AL Скачать руководство пользователя страница 22

– Redundant Array of Independent Disks (RAID)

Your server supports onboard SATA software RAID. If a required RAID card is installed, your server
also supports advanced SATA/SAS hardware RAID configurations. For detailed information, see
“Configuring RAID” on page 57.

– Status light-emitting diodes (LEDs) and diagnostic LEDs

For more information about the LEDs for your server, refer to the related topics in “Locations” on
page 11.

– Software programs

For more information about the software programs, see “Software” on page 10.

Specifications

This topic lists the physical specifications for your server.

Dimensions

Width: 195 mm (7.68 inches)

Height: 430 mm (16.93 inches) without foot stands; 445 mm (17.52 inches) with foot stands

Depth: 595 mm (23.43 inches) including the front bezel

Weight

The product weight varies depending on different system configurations.

Range of product weight without package: 19 kg (41.89 lb) to 28 kg (61.73 lb)

Range of product package weight: 2.8 kg (6.17 lb) to 3.5 kg (7.72 lb)

Environment

• Air temperature:

Operating: 10°C to 35°C (50°F to 95°F)

Storage: -40°C to 70°C (-40°F to 158°F) in original shipping package

• Altitude: 0 to 3048 m (0 to 10 000 ft)

• Humidity:

Operating: 10% to 80% (non-condensing)

Storage: 10% to 90% (non-condensing)

Electrical input

Universal input:

Minimum: 90 V ac

Maximum: 264 V ac

Input frequency range: 47 to 63 Hz

Software

This topic provides information about the software programs that you can use to set up, use, and maintain
the server.

ThinkServer EasyStartup

The ThinkServer EasyStartup program simplifies the process of configuring RAID and installing supported
Microsoft Windows and Linux operating systems and device drivers on your server. This program is provided

10

ThinkServer TS440 Hardware Maintenance Manual

«
...
20
21
22
23
24
...
»

Содержание 70AL































































































































































































Отзывы:

Нет отзывов