Lenovo 1996 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 136

Lenovo 1996 Скачать руководство пользователя страница 65

11. Lower and position the heat sink fan duct on the top of the heat sink and fan assembly until the two

screw holes in the heat sink fan duct are aligned with those in the heat sink and fan assembly. Install
the two screws to secure the heat sink fan duct.

Figure 38. Installing the heat sink fan duct

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the replacement, go to “Completing the parts replacement” on page 64.

Replacing the microprocessor

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important

safety information” on page v.

This section provides instructions on how to replace the microprocessor.

CAUTION:

The heat sink and microprocessor might be very hot. Turn off the computer and wait three to five
minutes to let the computer cool before removing the computer cover.

To replace the microprocessor, do the following:

1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect

all power cords from electrical outlets and disconnect all cables that are connected to the computer.

2. Open the computer cover. See “Opening the computer cover” on page 28.

Chapter 5

.

Installing or replacing hardware

53

«
...
63
64
65
66
67
...
»

Содержание 1996









































































































































Отзывы:

Нет отзывов